MAKE YOUR KITE
A kite has wire frame light wood reed or cane should be light.
2. First joins the reeds.
3. Cover the frame with paper. It can be paper, tissue paper, or other thin paper you get, and also serves you. used polyethylene bags.
4. Tape the edges by folding paper. If you use polyethylene bags, you sew it, because there is no right glue to bond.
5. Tie a long thread, very long, which serve to make your kite fly high, very high. Must be strong and be more than twenty meters. Tie it in the top frame cross and add four guides (two side and two on the rod below), and put them together after the main thread. Put it after the queue.
6. For the kite is balanced well in the air, the tail is almost always should be five times longer than the body of the kite. Make it the same material as this. Cut pieces of 22 by 5 centimeters, tie them, glue or sew them in line, leaving two inches of each other.
7. For your thread from tangling, use a roll and roll and unroll, at your convenience. We also used a big stick and about 15 inches long.
... paint it and ... to fly!
0 comments:
Post a Comment